ResMed Lumis 150 VPAP ST Bilevel Ventilator with iVAPS & 4G
Prescription required
SKU: RES28125 | MPN: 28125
- VPAP ST ventilator with Timed mode
- iVAPS volume-assured pressure support
- Intelligent Backup Rate & optional AutoEPAP
- HumidAir humidifier & ClimateLineAir tube
- Built-in 4G wireless with AirView monitoring
- Vsync synchrony with leak compensation
Delivery location required for AU, please enter a valid postcode.
The ResMed Lumis 150 VPAP ST is a non-invasive bilevel ventilator with Timed mode, iVAPS and Intelligent Backup Rate for non-dependent patients with respiratory insufficiency. HumidAir humidifier, ClimateLineAir tube and 4G AirView. Prescription required.
The ResMed Lumis 150 VPAP ST is a non-invasive bilevel ventilator that delivers personalised ventilation to non-dependent patients with respiratory insufficiency. As the ST model, it adds Timed mode with a backup rate and iVAPS over the Spontaneous-only Lumis 100 — and is supplied here with the HumidAir heated humidifier, ClimateLineAir heated tube and built-in 4G wireless connectivity.
Key Features
- Full mode set — CPAP, S, T and ST — Spontaneous and Timed bilevel therapy, so a backup rate can deliver breaths if your own rate falls below the prescribed setting.
- iVAPS (intelligent Volume-Assured Pressure Support) — targets a set ventilation level, automatically adjusting pressure support and providing intelligent backup breaths as needed.
- Intelligent Backup Rate (iBR) — adds backup breaths only when required, staying out of the way during normal spontaneous breathing.
- Optional AutoEPAP — can automatically adjust expiratory pressure to help maintain an open airway.
- IntelligentAir technology — Vsync keeps patient–ventilator synchrony despite mask leak, while TiControl and five trigger/cycle sensitivity levels let your clinician fine-tune timing.
- Automatic humidification — the HumidAir humidifier and ClimateLineAir heated tube deliver consistent warmth and moisture via Climate Control, reducing dryness and rainout.
- Built-in 4G wireless and AirView — therapy data uploads automatically for remote monitoring, with Ramp and Ramp Down for comfort at the start and end of each session.
Who Is This For?
The Lumis 150 VPAP ST is prescribed when bilevel support needs a backup rate or volume-assured ventilation — for example, in respiratory insufficiency where a patient can't be relied on to trigger every breath. It's a clinician-prescribed, physician-followed device. If your prescription is for spontaneous bilevel without a backup rate, the lower-cost ResMed Lumis 100 VPAP S covers that. Compare the full BiPAP / bilevel range if you're still deciding.
What's in the Box
- Lumis 150 VPAP ST device with integrated HumidAir humidifier
- ClimateLineAir heated tube
- Standard air tubing
- Reusable side cover and hypoallergenic filter
- AC power supply unit and cord
- Travel/carry bag
Prescription required. This is a prescription-only ventilator. You can upload your prescription and settings here so we can configure it before it ships. For full clinical detail, see the Lumis Handbook.
Item |
Warranty Period |
|
CPAP, bilevel and ventilation devices (including integrated humidifiers and including external power supply units). Battery accessories (including but not limited to DC cable, PSU adapter and coupler kit). |
2 years (Standard) 5 years (Extended) |
Click here for full Resmed warranty details
*ResMed terms & conditions apply
NB. Replacement items are not eligible for exchange.
| Specification | Detail |
|---|---|
| Device type | Non-invasive bilevel ventilator (VPAP ST) |
| Therapy modes | CPAP, S (Spontaneous), T (Timed), ST, PAC and iVAPS |
| Backup rate | Intelligent Backup Rate (iBR) |
| AutoEPAP | Optional |
| IntelligentAir technologies | Vsync, TiControl, trigger and cycle (5 sensitivity levels) |
| Comfort features | Ramp and Ramp Down |
| Humidification | HumidAir heated humidifier with automatic Climate Control |
| Heated tube | ClimateLineAir (included) |
| Connectivity | Built-in 4G wireless to AirView; myAir app for patients |
| Clinical software | ResScan, with high-resolution 25 Hz data |
| Intended use | Non-dependent patients with respiratory insufficiency (iVAPS indicated for patients over 30 kg) |
| Warranty | 2 years standard (5 years extended available) |
| SKU | RES28125 |
| Model # | 28125 |
| ARTG # | 236085 |
| UPC/EAN | 619498281251 |
| Brand | ResMed |
| Shipping Weight | 3.5000kg |
| Shipping Width | 0.320m |
| Shipping Height | 0.140m |
| Shipping Length | 0.370m |
| Shipping Cubic | 0.016576000m3 |
More From This Category
Lowenstein Prisma 25ST BiLevel (AUTO) S/T set with PrismaAQUA Humidifier & Heated Tube
SKU: LOWWM-29920-1111-KIT2
$3,850.00
PrismaCR AcSV Therapy set with PrismaAQUA Humidifier & Heated Tube
SKU: LOW29960-2111-KIT2
$3,960.00
ResMed Lumis 100 VPAP S 4G Wireless Connectivity, HumidAir & ClimateLineAir
SKU: RES28013
Now $2,599.00
ResMed Lumis 150 VPAP ST-A 4G Wireless Connectivity, HumidAir & ClimateLineAir
SKU: RES28226
Now $3,999.00

