ResMed AirFit P10 Nasal Pillow Mask Setup Pack for AirMini

The ResMed AirFit P10 for AirMini Setup Pack — everything you need to use the AirMini travel CPAP with the P10 nasal pillow mask. Includes the AirMini-specific version of the P10 mask, all three pillow sizes, the AirMini tube and connector, and both HumidX and HumidX Plus waterless humidification inserts. The AirMini machine is sold separately, or available as a complete bundle in the AirMini Freedom Travel Kit.

Important — Compatibility

• AirMini only: This setup pack is only compatible with the ResMed AirMini Travel CPAP Machine — it will not work with any other CPAP or BiLevel machine
• Standard AirFit P10 not compatible: If you own a standard AirFit P10 nasal pillow mask, it will not work with the AirMini. The AirMini requires this specially adapted version of the P10 with different venting technology and a built-in HumidX chamber

What's in the Box

• AirFit P10 for AirMini nasal pillow mask — AirMini-specific version with built-in HumidX chamber
• Three nasal pillow sizes — Small, Medium and Large (colour-coded for easy identification)
• AirMini 15mm slimline tube — connects the mask to the AirMini machine
• AirMini P10 mask connector/elbow
• 1× HumidX — waterless humidification for normal to humid conditions
• 1× HumidX Plus — waterless humidification for dry conditions including aircraft cabins
• Adjustable elastic headgear with single-side adjustment — no clips to manage
• User guide

About the P10 for AirMini Mask

The AirFit P10 is ResMed's most minimal nasal pillow mask — a three-piece design with dual-wall nasal pillows, QuietAir™ woven-mesh venting, and a simple elastic headgear that slips on and off without any clips. The AirMini version of the P10 is adapted specifically for the AirMini's ActiveAir™ tubing system, with a built-in HumidX chamber in the mask frame that allows waterless humidification to work at its most effective. Because all three pillow sizes are included, you can trial each size to find your best fit before committing to a size for replacement purchases.

About HumidX — Included in This Pack

Both a standard HumidX and a HumidX Plus are included with this pack. The HumidX sits inside the mask's built-in chamber, between the mask frame and the tube connector, capturing heat and moisture from each exhale and returning it on the next inhale — providing effective humidification without water. The standard HumidX suits typical Australian sleeping environments; the HumidX Plus is designed for drier conditions and in-flight use. Both units should be replaced 30 days after first opening. Replacement HumidX packs are available separately.

Maintenance

Remove the HumidX before cleaning. Wash the nasal pillows, frame and tube in warm water with mild liquid detergent, rinse thoroughly, and air dry away from direct sunlight. Hand wash the headgear in warm soapy water and allow to fully air dry before use. Replace the HumidX every 30 days. Replace the AirMini tube every 6 months.