Lowenstein Standard Breathing Tube 15mm

The Lowenstein Standard Breathing Tube 15mm (WM29988) is a genuine slim non-heated CPAP tube, supplied as standard with Prisma SMART/SOFT machines. 1.83m length with 22mm cuffs — fits any CPAP mask. Compatible with most modern slim-tube CPAP devices.

The Lowenstein Standard Breathing Tube 15 mm (WM29988) is the genuine non-heated slim tube for the Lowenstein PrismaLINE range — and it's the tube the Prisma SMART Max, Prisma SOFT Max, Prisma SMART Plus, and Prisma SOFT Plus all ship with as standard equipment. The 15 mm slim diameter makes it lighter and less obtrusive than older 22 mm standard tubes, and the universal 22 mm cuffed ends connect to any standard CPAP mask.

Key Features

  • 1.83 m (180 cm) length with 22 mm cuffed ends: Universal mask connection — fits any CPAP mask with the standard cuff fitting.
  • 15 mm slim inner diameter: Lighter and more flexible than older 22 mm tubes — easier to manoeuvre on the bedside table and packs flat for travel.
  • Low resistance, low compliance: Resistance <0.06 hPa/l/min @ 70 lpm and compliance <5 ml/hPa @ 60 hPa — pressure delivered to the mask matches what the machine specifies.
  • Genuine Lowenstein, latex-free: Part WM29988 — supplied as standard with Prisma SMART/SOFT machines, also a compatible replacement across the rest of the PrismaLINE range.

Compatibility

This is the standard supplied tube for the Lowenstein Prisma SMART Max, Prisma SOFT Max, Prisma SMART Plus, and Prisma SOFT Plus. It's also compatible with the Prisma 20A — which ships with the integrated 15 mm heated tube as default but can use this as a non-heated alternative — and any other CPAP or BiLevel machine that supports a 15 mm slim-tube setting.

Check your machine's tube setting. Modern CPAP machines have a tube-diameter setting in the menu (15 mm or 22 mm); for accurate pressure delivery, the setting must match the tube you're using. Most newer machines support both — older machines may be 22 mm only.

15 mm or 22 mm — Which Tube?

The 15 mm slim tube (this product) is the modern default — lighter, less rigid, and the standard for most CPAP machines manufactured in the past several years. If your machine doesn't have a 15 mm tube setting, or you're replacing a 22 mm tube on an older machine, the Lowenstein 22 mm non-heated tube is the right choice instead.

Heated or Non-Heated?

This tube is non-heated. If you experience rainout or condensation, heated alternatives are available:

Cleaning & Care

Wash the tube weekly in warm water with a mild detergent. Rinse thoroughly and air-dry out of direct sunlight. The tube is not autoclavable and should not be exposed to harsh chemicals or high heat.

When to Replace

Replace your CPAP tubing every 6 to 12 months as part of standard maintenance. Replace earlier if you notice cracks, holes, persistent odour, or visible build-up inside the tube that can't be cleaned out.

Specification Detail
Lowenstein part numberWM29988
Tube length1.83 m (180 cm)
Inner diameter15 mm (slim)
Cuff size22 mm (universal CPAP/BiLevel mask connection)
HeatingNon-heated
Resistance @ 70 lpm<0.06 hPa/l/min
Compliance @ 60 hPa<5 ml/hPa
MaterialFlexible plastic, latex-free
Standard supplied withLowenstein Prisma SMART Max, Prisma SOFT Max, Prisma SMART Plus, Prisma SOFT Plus
Also compatible withLowenstein Prisma 20A, and any other CPAP/BiLevel machine that supports a 15 mm slim-tube setting
Mask compatibilityAny standard CPAP mask with a 22 mm cuff connection
Machine settingSet machine to 15 mm tube in the menu for correct pressure delivery
AutoclavableNo
CleaningWeekly — warm water and mild detergent; air-dry only
Recommended replacementEvery 6–12 months
SKU LOWWM29988
Model # WM29988
UPC/EAN 4050384252003
Brand Lowenstein

You May Also Like

More From This Category