ResMed SlimLine Tubing Wrap for CPAP Hose

The ResMed SlimLine Tubing Wrap is a soft microfibre cover that slides over your existing SlimLine CPAP hose to reduce rainout, lower noise and slow overnight temperature loss. It's sized specifically for ResMed's 15 mm SlimLine 1.83 m air tubing — and it's a cover only. The hose is not included with this purchase.

Key Features

• Reduces rainout condensation: Microfibre lining helps the tube retain heat overnight, slowing the temperature drop that causes water droplets to form inside the hose.
• Quieter against bedding: The smooth fabric slides easily across sheets and reduces tube drag on your mask.
• Full-length zipper with Velcro strap: Wraps around your existing tube in seconds — no need to detach mask or machine connectors.
• 1.83 m length, 15 mm diameter: Sized for ResMed's slim non-heated air tubing.
• Hand-washable: Soft microfibre that can be gently hand-washed and air-dried.

Compatibility

This wrap is sized for ResMed's SlimLine 15 mm CPAP tubing — the slim non-heated grey tube commonly used with AirSense 10, AirCurve 10 and S9 series machines, as well as other CPAP and BiPAP machines configured to use 15 mm tubing.

Not for Standard 19 mm tubing. If you use ResMed's Standard Tubing or another 19 mm hose, the SlimLine wrap will be too snug — use the ResMed Standard Tubing Wrap instead.

Not needed for heated tubes. Heated tubes like the ClimateLineAir for AirSense 10 manage temperature internally and don't benefit from an additional insulating cover.

How to Fit the Wrap

Fully unzip the wrap and unfasten the Velcro strap. Pass one end of your SlimLine tube through the closed-zipper end, slide the wrap along the tube's length, then zip closed and secure the Velcro. Both connectors remain exposed, so you can still attach to your mask and machine without removing the wrap.

Cleaning & Care

Gently hand-wash the wrap in warm water and air-dry out of direct sunlight. Make sure the wrap is fully dry before refitting it to your tube. Washing the wrap doesn't replace cleaning the tube itself — your hose still needs its usual weekly clean.

Important Temperature Note

ResMed advises not using the tubing wrap when room temperature exceeds 30 °C. In hot conditions the insulation can raise the air temperature at the mask above comfortable levels.