ZephAir Universal CPAP Hose Connector for ResMed AirMini

The ZephAir Universal CPAP Hose Connector allows ResMed AirMini users to connect any standard CPAP hose and mask to the AirMini — breaking free from the AirMini's native mask compatibility limitations. Simply snap the connector onto the AirMini's hose outlet, attach a standard CPAP hose, and use any mask you like. CPAP hose sold separately. The ZephAir connector is also included in the AirMini Any Mask Kit, which bundles the connector with the AirMini machine and hose.

Compatibility

• ResMed AirMini Travel CPAP Machine (only — not compatible with any other CPAP device)

Compatible Hose Types

• Standard 22mm CPAP hose
• Slimline 15mm CPAP hose

Important Limitations

• HumidX not compatible: HumidX waterless humidification cannot be used when the ZephAir connector is installed. The HumidX system requires the AirMini's native elbow connector. If waterless humidification is important to you, use a compatible AirMini setup pack instead
• Heated tubing not compatible: The ZephAir connector does not support heated CPAP tubing (such as ResMed ClimateLine). Standard and slimline unheated hoses only
• Tubing not included: A standard CPAP hose must be purchased separately

How to Install and Remove

To install: align the ZephAir connector with the AirMini's hose outlet and press it firmly into place — an audible click confirms a secure fit. To remove: squeeze the finger tabs on either side of the connector and pull it away from the machine. No tools required.

Cleaning

Detach the ZephAir connector from the AirMini. Hand wash with mild soap and warm water, rinse thoroughly, and allow to air dry completely before reattaching. Do not submerge the AirMini machine.