ResMed AirFit N30 Nasal Cradle Mask Setup Pack for AirMini

The ResMed AirFit N30 for AirMini Setup Pack — everything you need to use the AirMini travel CPAP with the N30 nasal cradle mask. Includes the AirMini-specific version of the N30 mask, all three cradle cushion sizes, the AirMini tube and connector, and both HumidX and HumidX Plus waterless humidification. The AirMini machine is sold separately.

Important — Compatibility

• AirMini only: This setup pack is only compatible with the ResMed AirMini Travel CPAP Machine — it will not work with any other CPAP or BiLevel machine
• Standard AirFit N30 not compatible: If you own a standard AirFit N30 nasal mask, it will not work with the AirMini. The AirMini requires this specially adapted version of the N30 with integrated ActiveAir™ venting and a built-in HumidX chamber

What's in the Box

• AirFit N30 for AirMini nasal cradle mask — AirMini-specific version with integrated ActiveAir vent
• Three nasal cradle cushion sizes — Small, Medium and Small-Wide (colour-coded for easy identification)
• AirMini N30 mask connector/elbow
• AirMini 15mm slimline tube — connects the mask to the AirMini machine
• 1× HumidX — waterless humidification for normal to humid conditions
• 1× HumidX Plus — waterless humidification for dry conditions including aircraft cabins
• QuickFit elastic slip-on headgear — no clips, split-strap design
• User guide

About the N30 for AirMini Mask

The AirFit N30 is ResMed's lightest nasal mask — a minimal, three-piece design that uses a nasal cradle cushion sitting under and around the nostrils, rather than nasal pillows that insert into the nose. The cradle seals below the nostrils without any insertion, keeping the nasal bridge and the area inside the nostrils completely free of contact. This makes the N30 a good alternative to the P10 nasal pillow for users who find pillow insertion uncomfortable or irritating. The QuickFit elastic headgear slips on and off in seconds without any clips, and the split-strap design allows for easy adjustment while wearing the mask. Because all three cushion sizes are included, you can trial each one to find your best fit before committing to a size for replacement purchases.

N30 or P10 — Which Setup Pack Is Right for You?

Both the N30 and the P10 for AirMini are minimal, lightweight nasal masks — the main difference is how they seal. The P10 uses dual-wall nasal pillows that insert gently into the nostrils; the N30 uses a soft nasal cradle that cups the base of the nostrils from the outside without any insertion. Users who find nasal pillow insertion uncomfortable or who experience irritation inside the nostrils typically find the N30 more comfortable. Users who prefer the smallest possible mask footprint often prefer the P10.

About HumidX — Included in This Pack

Both a standard HumidX and a HumidX Plus are included with this pack. The HumidX sits in the N30 mask's connector between the frame and the tube, capturing heat and moisture from each exhale and returning it on the next inhale. The standard HumidX suits typical Australian sleeping environments; the HumidX Plus is designed for drier conditions and in-flight use. Both units should be replaced 30 days after first opening. Replacement HumidX packs are available separately.

Maintenance

Remove the HumidX before cleaning. Wash the nasal cradle cushions daily in warm water with mild soap, rinse thoroughly, and air dry away from direct sunlight. Clean the headgear and tube weekly using the same method. Replace the HumidX every 30 days. Replace the AirMini tube every 6 months.