ResMed N20 Nasal Mask AirMini Setup Pack

The ResMed N20 Nasal Mask AirMini Setup Pack — everything needed to connect an existing AirFit N20, AirFit N20 Classic, or AirTouch N20 nasal mask to the ResMed AirMini travel CPAP. Includes the AirMini N20 connector, AirMini tube, and both HumidX and HumidX Plus waterless humidification. Please note: the N20 mask is not included — masks are sold separately, or available as a complete bundle in the AirMini Starter Kit with Nasal Mask. The AirMini machine is also sold separately.

Compatibility

• ResMed AirFit N20 Nasal CPAP Mask
• ResMed AirFit N20 Classic Nasal CPAP Mask
• ResMed AirTouch N20 Nasal CPAP Mask

Compatible with the ResMed AirMini Travel CPAP Machine only — not compatible with any other CPAP or BiLevel machine.

What's in the Box

• AirMini N20 mask connector/elbow — pre-assembled with ActiveAir™ technology; twists apart to insert HumidX between the mask and the vent
• AirMini 15mm slimline tube — connects the mask to the AirMini machine
• 1× HumidX — waterless humidification for normal to humid conditions
• 1× HumidX Plus — waterless humidification for dry conditions including aircraft cabins
• User guide

Not included: AirFit N20, AirFit N20 Classic or AirTouch N20 mask; AirMini machine.

How the Connector Works

Remove the standard elbow from your AirFit N20, N20 Classic, or AirTouch N20 mask and replace it with the AirMini N20 connector included in this pack. The connector's ActiveAir™ vent is integrated directly into the elbow body — enabling AirMini compatibility and HumidX humidification in a single component. To use HumidX, twist the connector apart and insert the HumidX cartridge in the chamber between the mask and the vent. The AirMini tube then connects the other end of the connector to the AirMini machine. Keep your original N20 elbow — you'll need it to reconnect the mask to your standard bedside CPAP machine when you return from travel.

About HumidX — Included in This Pack

Both a standard HumidX and a HumidX Plus are included. The HumidX sits inside the N20 connector's twist-apart chamber, between the mask frame and the AirMini vent, capturing heat and moisture from each exhale and returning it on the next inhale. The standard HumidX suits typical Australian sleeping environments; the HumidX Plus is designed for drier conditions and in-flight use. Both units should be replaced 30 days after first opening. Replacement HumidX packs are available separately.

Maintenance

Remove the HumidX before cleaning. Wash the N20 connector and tube weekly with warm water and mild soap, rinse thoroughly, and air dry away from direct sunlight. Replace the HumidX every 30 days. Replace the AirMini tube every 6 months.