ResMed 90W Power Supply for AirSense 10, AirCurve 10 & Lumis (AU/NZ)

Genuine ResMed 90W AC power supply (part #37477) for the AirSense 10 series, AirCurve 10 CS PaceWave, and Lumis 100/150 VPAP machines. AU/NZ plug, right-angle entry for compact installation. Direct PSU replacement.

The genuine ResMed 90W AC Power Supply (part #37477) is the replacement mains adapter for the ResMed AirSense 10 series, AirCurve 10 CS PaceWave, and Lumis 100/150 VPAP machines. It's the same PSU that ships in the box with new units. AU/NZ wall plug (Type I, 240V AC), with a right-angle connector at the machine end so cables sit flatter against the unit and tuck more easily behind a bedside table.

Compatible CPAP & BiLevel Machines

Machine Family Specific Models
ResMed AirSense 10 AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her
ResMed AirCurve 10 AirCurve 10 CS PaceWave
ResMed Lumis Lumis 100 VPAP S, Lumis 150 VPAP ST, Lumis 150 VPAP ST-A

When You Might Need This

  • Lost or damaged original — power cables and adapters are the most commonly misplaced CPAP accessory, especially after travel.
  • Spare for travel — keep one PSU permanently in the travel case and one at home, so you're never caught without mains power.
  • Worn or frayed cable — over years of nightly use the strain-relief on the machine-side plug can wear out.
  • Audible electrical hum — an ageing PSU sometimes develops a faint coil whine; a fresh adapter usually solves it.
Important — Not compatible with the current ResMed Power Station II (RPS II). This PSU connects directly between AC mains and your CPAP. If you're running an RPS II battery backup, you need the separate RPS II – AirSense 10 / Lumis PSU Adapter instead. Check which configuration you have before ordering.

Other Power Options for AirSense 10 & Lumis

If you're looking for vehicle or battery power rather than mains, the AirSense 10 / Lumis 12V DC Converter handles cigarette-lighter sockets in cars and boats, and the Medistrom Pilot-24 Lite provides portable backup power for camping and air travel.

Item

Warranty Period
Batteries for use in ResMed - includes internal and external battery systems 6 months

Click here for full ResMed warranty details

Specification Detail
Compatible machines ResMed AirSense 10 (Elite, AutoSet, AutoSet for Her); AirCurve 10 CS PaceWave; Lumis 100 VPAP S, 150 VPAP ST, 150 VPAP ST-A
Not compatible with Current version of ResMed Power Station II (RPS II) — requires separate PSU adapter (part 37342)
Output power 90W
Input AC mains 240V, Australian wall socket (Type I plug)
Region Australia & New Zealand
Cable design Right-angle entry at machine end for compact installation
Warranty 6 months
SKU RES37477
Model # 37477
ARTG # 222485
UPC/EAN 619498374779
Brand ResMed

More From This Category